Technology advancement has developed a variety of window blinds suited to many forms of window glasses. However, you have to know what kind of window blind is suited to your window glass type before you purchase one.

The ultimate way to install your window blinds properly is to read and understand the manufacturer’s instructions. The type of window blind you bought determines the required installation procedure. Hence, installation of vertical blinds will be different from that of horizontal blinds. Prepare the tools needed such as tape measure, screwdriver, drill and drill bits, level, and pencil before installing. Then make sure if all the necessary parts are present by checking the contents of the box.

There are two ways to install this type of window treatment product: the inside mount and the outside mount. When doing an inside mount, make sure the headrail is clear of obstructions. This is important to ensure maximum function of your window blinds. You can achieve this by utilizing the level. Mark the spaces below the headrail on both ends. This is where you will put your right and left hand installation brackets.

When you’re doing an outside mount, determine the center of the window casing and hold down the blind level on this. Mark the ends of the casing below the headrail. Mark 1/8 of the window casing outside of the limits of the headrail. This is where you will place the installation brackets.

You are then ready for the installation of brackets after you are done with the preparations mentioned earlier. Using the appropriate screws helps you accomplish the task easier and faster. Each mounting bracket is attached using two screws. However, there are particular type of blinds that may require a middle mounting bracket. Also, consider the kind of surface the mounting brackets will be attached to.

You can hire a professional if there are so many spaces to cover and you are in doubt of your efficiency in doing the job. If you are installing blinds in houses, check if there are extruded guide rails on the windows. These are anodized and coated with white. If there are none, you may ask a professional to install these.

Contact Window Cool (we supply globally) for window film or learn more about roller blinds by visiting us today.